cryogenic elastomeric foam rubber thermal insulation sheet roll

Kingflex Cryogenic products are designed to meet the demands of low-temperature environments. And it is can reduce the risk of corrosion under insulation, and mimimise the time needed for installation. It is suitable for temperatures to -183 °C.

It is designed to meet the demands of low-temperature environments and is suitable for use in the oil and gas industry. This insulation solution provides exceptional thermal performance, reduces the risk of corrosion under insulation (CUI) and minimises the time needed for installation.

Send email to us

Product Detail

Product Tags

King flex flexible ultra-low temperature insulation system belongs to the multi-layer composite structure, is the most economical and reliable cooling system. The system can be directly installed under the temperature as low as -110°C on all piping equipment when the surface temperature of the pipe is lower than -100 °C and the pipeline usually has obvious repeated movement or vibration.

ULT Sheet standard size
Code	Thickness(mm)	Length(m)	M2/Bag
KF-ULT-25	25	8	8

Technical Data:

Performance	Base Material		Standard
Performance	Kingflex ULT	Kingflex LT	Standard
Themal Conductivity	(-100℃, 0.028 -165℃, 0.021)	(0℃,0.033, -50 ℃, 0.028)	ASTM C177 EN 12667
Density	60-80 kg/m3	40-60 kg/m3	ASTM D 1622
Recommend Operating Temperature	(-200℃ +125℃)	(-50℃ +105℃)	NA
Percentage of Close Area	> 95%	>95%	ASTM D 2856
Moisture Permeance Factor	NA	< 1.96 × 10g (m.s.Pa)	ASTM E96
Wet Resistance Factor µ	NA	>10000	EN 12086 EN 13469
Water Vapor Permeability Coefficient	NA	0.0039g/h.m2 (25mm thickness)	ASTM E96
PH	≥ 8.0	≥ 8.0	ASTM C871
Tensile Strength MPa	-100℃, 0.30 -165℃, 0.25	0℃, 0.15 -40℃, 0.218	ASTM D 1623
Compressive Strength MPa	(-100℃, ≤0.37)	(-40℃ ,≤0.16)	ASTM D 1621